Ayon Audio CD 1sc

Klicka för en större bild

Ayon introducerar med tillfredställelse CD 1sc, en omkonstruktion av vår redan högst respekterade CD 1s modell. CD 1sc behåller samma grundarkitektur som CD 2s men har konstruerats att bemöta en mer aggressiv prisbild.

 

Denna CD-Spelare (CD 1sc) presenterar en ny nivå av musikalisk prestanda med slående vitalitet, transparens, naturlig värme, superb dynamiska kontraster och förutom alla dessa egenskaper en exceptionell konstruktionskvalitet.

 

CD 1sc är en av de finaste rörbestyckade CD-Spelarna i sin klass.

 

Specifikationer

Sampling: 192kHz / 24 bit

 

Rörbestyckning: 6H30, 6Z4

 

Dynamiskt omfång: > 115dB

 

Utgångsnivå: 1 kHz / 0,775V -0dB

Low 0 – 2.2 V / variabel / XLR +6dB

 

Utgångsnivå: 1 kHz / 0,775V -0dB

High 0 – 4.4V / variable / XLR +6dB

 

Utgångsimpedans: Single-Ended-RCA ~ 300 Ω

 

Utgångsimpedans: Balanced-XLR ~ 300 Ω

 

Digital utgång: 75 Ω S/PDIF (RCA)

 

Digital ingång: 75 Ω S/PDIF (RCA), USB – 24/192 kHz, TosLink

 

S/N förhållande: > 118 dB

 

Frequency response

20Hz - 20kHz +/- 0.3dB

 

THD: 1kHz < 0.001%

 

Fjärrkontroll: Ja

 

Utgångar: RCA & XLR

 

Dimensioner: (W x D x H): 48 x 33 x 12 cm

 

Vikt: 13 kg

 

Features & Design

 

Full-featured Tube Top Loader CD-Player
Class-A triode vacuum-tube output stage for single-ended & balanced operation

 

Signal Path
We believe that the simplest circuits work best together with the shortest signal path. That is why our pre-amplifiers to date have used single-ended pure class-A circuitry. The shorter the signal path is, the less possibility of sonic degradation from various sources, including the wire itself. Even on the circuit boards, the copper traces are kept to a very minimum length. The completely redesigned circuit board provides a more straightforward and direct approach to the signal paths.

  • Logical sequenced soft-start power up for extended tube life
  • Warm up function
  • 0dB negative feedback (of any kind )
  • Ultra short signal path
  • Simplest direct circuit path for purest musical sound and high reliability
  • Low output impedance for driving long runs interconnect to an amplifier, and any tube or solid state power amp
  • No solid state devices in the analog tube output (signal path )
  • Minimal discrete wiring for optimum signal propagation
  • No followers or buffers in the signal path
  • No DC servo that degrades the signal
  • High quality parts throughout
  • Fully hand assembled to insure the highest level of craftsmanship
  • Separate analog output stage for left and right channel
  • Burr Brown D/A converter
  • Upsampling 24bit/192kHz and on/off switchable
  • Digital input - S/PDIF (RCA) & TosLink
  • USB input – 24/192 kHz ( asynchronous)
  • Digital output - S/PDIF (RCA)

 

Power Supply
The power supplies have been further refined with new components and enhanced AC line noise filtration. Separate power transformer windings and filters provide total isolation between the input and output stage which makes this a pure power source and it is a critical attribute for a 6H30 output stage. We also use electrolytic capacitors with much larger storage capacity to make up for the loss in filtering when using resistors in lieu of inductors.

  • R-Core / Low noise – insulated power transformer for digital & analog
  • Innovative power supply provides a high speed energy delivery on transients
  • Separate and isolated power supplies over each stage of amplification
  • AC power line filter to avoid noise and hash from entering into the unit.
  • Tube rectification for 6H30 analog output stage
  • 10 separate voltage regulators

 

Components
The type of parts used therefore must have a synergistic relationship to the circuit they are placed in. It is this relationship of which type of part to use where, that ranks our products apart from the mass.

  • Selected, premium quality passive components used in all applications
  • High speed & high quality audiophile grade coupling capacitors
  • High quality Special tube sockets with gold pins
  • Capacitors ( MKP 2% )
  • High quality – RCA & XLR jack
  • Gold-plated industrial grade PCB

 

Mechanical Construction
The high grade aluminum chassis impart a richer, more lustrous tonality with a cleaner back-ground and less hash and grain. All brushed anodized anti-vibration-resonance and non-magnetic chassis's are fully hand assembled to insure the highest level of craftsmanship.

  • Backlit function buttons
  • Modified suspension system to isolate the CD-transport from mechanical vibrations
  • Anti-vibration magnetic integral CD-clamp system combined with dark acrylic CD-cover
  • Front panel descriptions are engraved
  • AC phase polarity control indicator
  • The aluminium feet are resonance absorbing types
  • Metal remote commander
  • Chassis finish: black / chrome